Price List No. 109/2026 · w.e.f. 1st October 2026

DRP MS Forged Pipe Fittings Price List 2026 — 1000 LBS & 3000 LBS

Authorised DRP Dealer & Distributor 1000 LBS Threaded · IS:1239 Pt-II 3000 LBS Socket Weld · ANSI B16.11 6mm – 100mm Ready Stock Delhi Pan-India Supply

LIST prices · per piece · Ex-Delhi Warehouse · GST 18% extra

✓ Authorised DRP Dealer & Distributor — View Certificate

Vijay Sales Corporation is an authorised DRP dealer and distributor for DRP MS forged pipe fittings — drop-forged steel fittings made to both Indian standards, 1000 LBS threaded to IS:1239 (Part-II) and 3000 LBS socket weld to IS:4712 / ANSI B16.11. Ready stock is held at our Delhi warehouse and supplied across India.

MS forged pipe fittings are made by drop-forging solid steel billet into shape, giving a dense, grain-following body far stronger than a cast fitting for the same wall. This price list covers the full DRP forged steel range that Vijay Sales Corporation stocks in Delhi, in two working classes. The 1000 LBS threaded class has BSP threads and screws onto steel pipe so joints can be opened again with hand tools. The 3000 LBS socket weld class drops the pipe into a deep socket and is fillet-welded for a heavier-wall, permanent, leak-free joint.

Between the two classes the list runs every common pattern: elbow, tee, socket, union, reducing elbow, reducing tee, reducing socket, male/female elbow, reducing bush, plug, hex nipple, reducing hex nipple, hydraulic nipple, reducing hydraulic nipple, cross, reducing cross and 45° elbow, plus the socket-weld elbow, tee, union, socket, cross and their reducing variants. Every rate below is a list price, per piece, ex-Delhi. Full dimensional charts for each fitting are on the DRP MS forged fittings specifications page.

1000 LBS THREADED · IS:1239 (PART-II) 2011 / BS EN-10241:2000

1000 LBS Threaded Fittings — 17 Items × 12 Sizes

List prices per piece, ex-Delhi warehouse. GST 18% extra; discount on requirement.

LIST per piece Ex-Delhi Warehouse GST 18% extra
Fitting Type 6MM8MM10MM15MM20MM25MM32MM40MM50MM65MM80MM100MM
1/8"1/4"3/8"1/2"3/4"1"1.1/4"1.1/2"2"2.1/2"3"4"
DRP MS Forged Elbow Threaded — 1000 LBSRs. 62Rs. 62Rs. 80Rs. 108Rs. 166Rs. 254Rs. 520Rs. 689Rs. 1,287Rs. 2,611Rs. 4,078—
DRP MS Forged Tee Threaded — 1000 LBSRs. 91Rs. 91Rs. 110Rs. 154Rs. 217Rs. 347Rs. 689Rs. 919Rs. 1,624Rs. 4,231Rs. 6,612—
DRP MS Forged Union Threaded — 1000 LBSRs. 143Rs. 143Rs. 156Rs. 196Rs. 245Rs. 362Rs. 625Rs. 783Rs. 1,241Rs. 3,750Rs. 4,869—
DRP MS Forged Socket Threaded — 1000 LBSRs. 22Rs. 22Rs. 28Rs. 51Rs. 56Rs. 94Rs. 142Rs. 178Rs. 307Rs. 585Rs. 645Rs. 1,500
DRP MS Forged Reducing Elbow (Equal O.D.) — 1000 LBS—Rs. 67Rs. 85Rs. 119Rs. 183Rs. 286Rs. 572Rs. 767Rs. 1,421Rs. 3,016Rs. 4,715—
DRP MS Forged Reducing Tee (Equal O.D.) — 1000 LBS—Rs. 108Rs. 129Rs. 167Rs. 245Rs. 386Rs. 767Rs. 1,022Rs. 1,791Rs. 4,861Rs. 7,604—
DRP MS Forged Reducing Socket (Equal O.D.) — 1000 LBS—Rs. 19Rs. 23Rs. 51Rs. 64Rs. 121Rs. 179Rs. 219Rs. 381Rs. 796Rs. 866Rs. 1,875
DRP MS Forged Elbow (Male/Female) — 1000 LBS—Rs. 86Rs. 111Rs. 152Rs. 230Rs. 345Rs. 670Rs. 908Rs. 1,632Rs. 3,698Rs. 4,983—
DRP MS Forged Reducing Bush — 1000 LBS—Rs. 18Rs. 19Rs. 22Rs. 34Rs. 57Rs. 139Rs. 166Rs. 322Rs. 889Rs. 1,255—
DRP MS Forged Plug — 1000 LBSRs. 11Rs. 12Rs. 17Rs. 22Rs. 35Rs. 58Rs. 86Rs. 112Rs. 190Rs. 475Rs. 713—
DRP MS Forged Hex Nipple — 1000 LBSRs. 21Rs. 21Rs. 24Rs. 41Rs. 58Rs. 84Rs. 142Rs. 180Rs. 308Rs. 1,083Rs. 1,529—
DRP MS Forged Reducing Hex Nipple — 1000 LBS—Rs. 25Rs. 28Rs. 43Rs. 57Rs. 105Rs. 195Rs. 233Rs. 470———
DRP MS Forged Nipple (Hydraulic) — 1000 LBS—Rs. 55Rs. 55Rs. 77Rs. 92Rs. 130Rs. 349Rs. 474Rs. 869———
DRP MS Forged Reducing Nipple (Hydraulic) — 1000 LBS—Rs. 64Rs. 64Rs. 95Rs. 117Rs. 161Rs. 435Rs. 593Rs. 1,087———
DRP MS Forged Cross — 1000 LBS—Rs. 212Rs. 224Rs. 245Rs. 355Rs. 605Rs. 1,264Rs. 1,653Rs. 2,848———
DRP MS Forged Reducing Cross — 1000 LBS—Rs. 232Rs. 248Rs. 272Rs. 392Rs. 667Rs. 1,390Rs. 1,816Rs. 3,132———
DRP MS Forged Elbow 45° — 1000 LBS———Rs. 153Rs. 244Rs. 389Rs. 651Rs. 861Rs. 1,609———
6MM · 1/8"Rs. 62
8MM · 1/4"Rs. 62
10MM · 3/8"Rs. 80
15MM · 1/2"Rs. 108
20MM · 3/4"Rs. 166
25MM · 1"Rs. 254
32MM · 1.1/4"Rs. 520
40MM · 1.1/2"Rs. 689
50MM · 2"Rs. 1,287
65MM · 2.1/2"Rs. 2,611
80MM · 3"Rs. 4,078
100MM · 4"—
6MM · 1/8"Rs. 91
8MM · 1/4"Rs. 91
10MM · 3/8"Rs. 110
15MM · 1/2"Rs. 154
20MM · 3/4"Rs. 217
25MM · 1"Rs. 347
32MM · 1.1/4"Rs. 689
40MM · 1.1/2"Rs. 919
50MM · 2"Rs. 1,624
65MM · 2.1/2"Rs. 4,231
80MM · 3"Rs. 6,612
100MM · 4"—
6MM · 1/8"Rs. 143
8MM · 1/4"Rs. 143
10MM · 3/8"Rs. 156
15MM · 1/2"Rs. 196
20MM · 3/4"Rs. 245
25MM · 1"Rs. 362
32MM · 1.1/4"Rs. 625
40MM · 1.1/2"Rs. 783
50MM · 2"Rs. 1,241
65MM · 2.1/2"Rs. 3,750
80MM · 3"Rs. 4,869
100MM · 4"—
6MM · 1/8"Rs. 22
8MM · 1/4"Rs. 22
10MM · 3/8"Rs. 28
15MM · 1/2"Rs. 51
20MM · 3/4"Rs. 56
25MM · 1"Rs. 94
32MM · 1.1/4"Rs. 142
40MM · 1.1/2"Rs. 178
50MM · 2"Rs. 307
65MM · 2.1/2"Rs. 585
80MM · 3"Rs. 645
100MM · 4"Rs. 1,500
6MM · 1/8"—
8MM · 1/4"Rs. 67
10MM · 3/8"Rs. 85
15MM · 1/2"Rs. 119
20MM · 3/4"Rs. 183
25MM · 1"Rs. 286
32MM · 1.1/4"Rs. 572
40MM · 1.1/2"Rs. 767
50MM · 2"Rs. 1,421
65MM · 2.1/2"Rs. 3,016
80MM · 3"Rs. 4,715
100MM · 4"—
6MM · 1/8"—
8MM · 1/4"Rs. 108
10MM · 3/8"Rs. 129
15MM · 1/2"Rs. 167
20MM · 3/4"Rs. 245
25MM · 1"Rs. 386
32MM · 1.1/4"Rs. 767
40MM · 1.1/2"Rs. 1,022
50MM · 2"Rs. 1,791
65MM · 2.1/2"Rs. 4,861
80MM · 3"Rs. 7,604
100MM · 4"—
6MM · 1/8"—
8MM · 1/4"Rs. 19
10MM · 3/8"Rs. 23
15MM · 1/2"Rs. 51
20MM · 3/4"Rs. 64
25MM · 1"Rs. 121
32MM · 1.1/4"Rs. 179
40MM · 1.1/2"Rs. 219
50MM · 2"Rs. 381
65MM · 2.1/2"Rs. 796
80MM · 3"Rs. 866
100MM · 4"Rs. 1,875
6MM · 1/8"—
8MM · 1/4"Rs. 86
10MM · 3/8"Rs. 111
15MM · 1/2"Rs. 152
20MM · 3/4"Rs. 230
25MM · 1"Rs. 345
32MM · 1.1/4"Rs. 670
40MM · 1.1/2"Rs. 908
50MM · 2"Rs. 1,632
65MM · 2.1/2"Rs. 3,698
80MM · 3"Rs. 4,983
100MM · 4"—
6MM · 1/8"—
8MM · 1/4"Rs. 18
10MM · 3/8"Rs. 19
15MM · 1/2"Rs. 22
20MM · 3/4"Rs. 34
25MM · 1"Rs. 57
32MM · 1.1/4"Rs. 139
40MM · 1.1/2"Rs. 166
50MM · 2"Rs. 322
65MM · 2.1/2"Rs. 889
80MM · 3"Rs. 1,255
100MM · 4"—
6MM · 1/8"Rs. 11
8MM · 1/4"Rs. 12
10MM · 3/8"Rs. 17
15MM · 1/2"Rs. 22
20MM · 3/4"Rs. 35
25MM · 1"Rs. 58
32MM · 1.1/4"Rs. 86
40MM · 1.1/2"Rs. 112
50MM · 2"Rs. 190
65MM · 2.1/2"Rs. 475
80MM · 3"Rs. 713
100MM · 4"—
6MM · 1/8"Rs. 21
8MM · 1/4"Rs. 21
10MM · 3/8"Rs. 24
15MM · 1/2"Rs. 41
20MM · 3/4"Rs. 58
25MM · 1"Rs. 84
32MM · 1.1/4"Rs. 142
40MM · 1.1/2"Rs. 180
50MM · 2"Rs. 308
65MM · 2.1/2"Rs. 1,083
80MM · 3"Rs. 1,529
100MM · 4"—
6MM · 1/8"—
8MM · 1/4"Rs. 25
10MM · 3/8"Rs. 28
15MM · 1/2"Rs. 43
20MM · 3/4"Rs. 57
25MM · 1"Rs. 105
32MM · 1.1/4"Rs. 195
40MM · 1.1/2"Rs. 233
50MM · 2"Rs. 470
65MM · 2.1/2"—
80MM · 3"—
100MM · 4"—
6MM · 1/8"—
8MM · 1/4"Rs. 55
10MM · 3/8"Rs. 55
15MM · 1/2"Rs. 77
20MM · 3/4"Rs. 92
25MM · 1"Rs. 130
32MM · 1.1/4"Rs. 349
40MM · 1.1/2"Rs. 474
50MM · 2"Rs. 869
65MM · 2.1/2"—
80MM · 3"—
100MM · 4"—
6MM · 1/8"—
8MM · 1/4"Rs. 64
10MM · 3/8"Rs. 64
15MM · 1/2"Rs. 95
20MM · 3/4"Rs. 117
25MM · 1"Rs. 161
32MM · 1.1/4"Rs. 435
40MM · 1.1/2"Rs. 593
50MM · 2"Rs. 1,087
65MM · 2.1/2"—
80MM · 3"—
100MM · 4"—
6MM · 1/8"—
8MM · 1/4"Rs. 212
10MM · 3/8"Rs. 224
15MM · 1/2"Rs. 245
20MM · 3/4"Rs. 355
25MM · 1"Rs. 605
32MM · 1.1/4"Rs. 1,264
40MM · 1.1/2"Rs. 1,653
50MM · 2"Rs. 2,848
65MM · 2.1/2"—
80MM · 3"—
100MM · 4"—
6MM · 1/8"—
8MM · 1/4"Rs. 232
10MM · 3/8"Rs. 248
15MM · 1/2"Rs. 272
20MM · 3/4"Rs. 392
25MM · 1"Rs. 667
32MM · 1.1/4"Rs. 1,390
40MM · 1.1/2"Rs. 1,816
50MM · 2"Rs. 3,132
65MM · 2.1/2"—
80MM · 3"—
100MM · 4"—
6MM · 1/8"—
8MM · 1/4"—
10MM · 3/8"—
15MM · 1/2"Rs. 153
20MM · 3/4"Rs. 244
25MM · 1"Rs. 389
32MM · 1.1/4"Rs. 651
40MM · 1.1/2"Rs. 861
50MM · 2"Rs. 1,609
65MM · 2.1/2"—
80MM · 3"—
100MM · 4"—

All rates in Rs. per piece. "—" indicates size not offered. NPT & BSPT threading 20% extra · Hot Galvanised 25% extra · Bombay Polish 15% extra · DRP Steel Cap Socket 10% extra.

3000 LBS SOCKET WELD · IS:4712-2011 / ANSI B16.11

3000 LBS Socket Weld Fittings — 10 Items

List prices per piece, ex-Delhi warehouse. GST 18% extra; discount on requirement.

LIST per piece Ex-Delhi Warehouse GST 18% extra
Fitting Type 6MM8MM10MM15MM20MM25MM32MM40MM50MM65MM80MM100MM
1/8"1/4"3/8"1/2"3/4"1"1.1/4"1.1/2"2"2.1/2"3"4"
DRP Steel Elbow Forged S.W. — 3000 LBS—Rs. 111Rs. 122Rs. 122Rs. 183Rs. 294Rs. 518Rs. 686Rs. 1,261Rs. 2,611Rs. 4,078—
DRP Steel Reducing Elbow S.W. — 3000 LBS—Rs. 122Rs. 135Rs. 135Rs. 201Rs. 322Rs. 569Rs. 754Rs. 1,388Rs. 2,873Rs. 4,485—
DRP Steel Tee Forged S.W. — 3000 LBS—Rs. 149Rs. 165Rs. 167Rs. 245Rs. 383Rs. 685Rs. 903Rs. 1,605Rs. 4,227Rs. 6,611—
DRP Steel Reducing Tee S.W. — 3000 LBS—Rs. 165Rs. 182Rs. 183Rs. 272Rs. 421Rs. 752Rs. 994Rs. 1,764Rs. 4,649Rs. 7,272—
DRP Steel Union Forged S.W. — 3000 LBS—Rs. 259Rs. 259Rs. 275Rs. 471Rs. 700Rs. 1,166Rs. 1,409Rs. 2,021———
DRP Steel Socket Forged S.W. — 3000 LBS—Rs. 39Rs. 52Rs. 66Rs. 106Rs. 133Rs. 235Rs. 290Rs. 486Rs. 1,010Rs. 1,329Rs. 3,415
DRP Steel Reducing Socket S.W. — 3000 LBS—Rs. 47Rs. 64Rs. 83Rs. 133Rs. 167Rs. 296Rs. 365Rs. 606Rs. 1,261Rs. 1,657Rs. 4,030
DRP Steel Cross Forged S.W. — 3000 LBS—Rs. 232Rs. 248Rs. 272Rs. 391Rs. 667Rs. 1,390Rs. 1,816Rs. 3,132———
DRP Steel Reducing Cross S.W. — 3000 LBS—Rs. 256Rs. 273Rs. 297Rs. 430Rs. 735Rs. 1,529Rs. 1,998Rs. 3,444———
DRP Steel Elbow 45° S.W. — 3000 LBS———Rs. 176Rs. 266Rs. 426Rs. 750Rs. 994Rs. 1,597———
6MM · 1/8"—
8MM · 1/4"Rs. 111
10MM · 3/8"Rs. 122
15MM · 1/2"Rs. 122
20MM · 3/4"Rs. 183
25MM · 1"Rs. 294
32MM · 1.1/4"Rs. 518
40MM · 1.1/2"Rs. 686
50MM · 2"Rs. 1,261
65MM · 2.1/2"Rs. 2,611
80MM · 3"Rs. 4,078
100MM · 4"—
6MM · 1/8"—
8MM · 1/4"Rs. 122
10MM · 3/8"Rs. 135
15MM · 1/2"Rs. 135
20MM · 3/4"Rs. 201
25MM · 1"Rs. 322
32MM · 1.1/4"Rs. 569
40MM · 1.1/2"Rs. 754
50MM · 2"Rs. 1,388
65MM · 2.1/2"Rs. 2,873
80MM · 3"Rs. 4,485
100MM · 4"—
6MM · 1/8"—
8MM · 1/4"Rs. 149
10MM · 3/8"Rs. 165
15MM · 1/2"Rs. 167
20MM · 3/4"Rs. 245
25MM · 1"Rs. 383
32MM · 1.1/4"Rs. 685
40MM · 1.1/2"Rs. 903
50MM · 2"Rs. 1,605
65MM · 2.1/2"Rs. 4,227
80MM · 3"Rs. 6,611
100MM · 4"—
6MM · 1/8"—
8MM · 1/4"Rs. 165
10MM · 3/8"Rs. 182
15MM · 1/2"Rs. 183
20MM · 3/4"Rs. 272
25MM · 1"Rs. 421
32MM · 1.1/4"Rs. 752
40MM · 1.1/2"Rs. 994
50MM · 2"Rs. 1,764
65MM · 2.1/2"Rs. 4,649
80MM · 3"Rs. 7,272
100MM · 4"—
6MM · 1/8"—
8MM · 1/4"Rs. 259
10MM · 3/8"Rs. 259
15MM · 1/2"Rs. 275
20MM · 3/4"Rs. 471
25MM · 1"Rs. 700
32MM · 1.1/4"Rs. 1,166
40MM · 1.1/2"Rs. 1,409
50MM · 2"Rs. 2,021
65MM · 2.1/2"—
80MM · 3"—
100MM · 4"—
6MM · 1/8"—
8MM · 1/4"Rs. 39
10MM · 3/8"Rs. 52
15MM · 1/2"Rs. 66
20MM · 3/4"Rs. 106
25MM · 1"Rs. 133
32MM · 1.1/4"Rs. 235
40MM · 1.1/2"Rs. 290
50MM · 2"Rs. 486
65MM · 2.1/2"Rs. 1,010
80MM · 3"Rs. 1,329
100MM · 4"Rs. 3,415
6MM · 1/8"—
8MM · 1/4"Rs. 47
10MM · 3/8"Rs. 64
15MM · 1/2"Rs. 83
20MM · 3/4"Rs. 133
25MM · 1"Rs. 167
32MM · 1.1/4"Rs. 296
40MM · 1.1/2"Rs. 365
50MM · 2"Rs. 606
65MM · 2.1/2"Rs. 1,261
80MM · 3"Rs. 1,657
100MM · 4"Rs. 4,030
6MM · 1/8"—
8MM · 1/4"Rs. 232
10MM · 3/8"Rs. 248
15MM · 1/2"Rs. 272
20MM · 3/4"Rs. 391
25MM · 1"Rs. 667
32MM · 1.1/4"Rs. 1,390
40MM · 1.1/2"Rs. 1,816
50MM · 2"Rs. 3,132
65MM · 2.1/2"—
80MM · 3"—
100MM · 4"—
6MM · 1/8"—
8MM · 1/4"Rs. 256
10MM · 3/8"Rs. 273
15MM · 1/2"Rs. 297
20MM · 3/4"Rs. 430
25MM · 1"Rs. 735
32MM · 1.1/4"Rs. 1,529
40MM · 1.1/2"Rs. 1,998
50MM · 2"Rs. 3,444
65MM · 2.1/2"—
80MM · 3"—
100MM · 4"—
6MM · 1/8"—
8MM · 1/4"—
10MM · 3/8"—
15MM · 1/2"Rs. 176
20MM · 3/4"Rs. 266
25MM · 1"Rs. 426
32MM · 1.1/4"Rs. 750
40MM · 1.1/2"Rs. 994
50MM · 2"Rs. 1,597
65MM · 2.1/2"—
80MM · 3"—
100MM · 4"—

All rates in Rs. per piece. "—" indicates size not offered. NPT & BSPT threading 20% extra · Hot Galvanised 25% extra · Bombay Polish 15% extra.

BUYING GUIDE

Choosing the Right Forged Fitting

Class, pattern and the small parts, in plain terms.

◐

1000 LBS threaded vs 3000 LBS socket-weld

Pick 1000 LBS threaded where a line stays serviceable and may be opened again — small-bore water, compressed air, instrument tap-offs and utility runs that need no welder on site. Pick 3000 LBS socket-weld where the joint is welded and permanent, for higher-pressure steam, hydraulic and process lines that will be tested once and left. The class number is the manufacturer hydro-test pressure, not a fixed working limit.

⇲

Straight vs reducing fittings

A straight elbow, tee or socket keeps one bore right through. A reducing pattern steps the line down to a smaller branch or run. DRP reducing elbows, tees and sockets here are Equal O.D. items, priced by the listed nominal size rather than by each end combination — so confirm both ends when you order and we match the exact piece.

⌁

Nipples, plugs and bushes decoded

A hex nipple is a short male-male connector with a hex centre for a spanner; the hydraulic nipple is a longer-barrel pattern that seals differently and is quoted by name. A reducing nipple joins two different sizes. To close a line, a plug shuts a female opening, while a reducing bush steps a female thread down to a smaller male — the two are not interchangeable.

DROP-FORGED STEEL

DRP MS Forged Fittings Range

The DRP forged steel range, photographed at our Delhi warehouse.

Elbow 45° and the full 3000 LBS socket-weld range are also ex-stock — rates above.

WHERE THEY ARE USED

Applications

Where DRP MS forged fittings are commonly used.

Oil & gas lines

Small-bore process, sampling and utility connections on plant piping.

Fire-fighting mains

Hydrant branches, sprinkler sub-mains and hose-reel take-offs.

Steam & condensate

Steam traps, drip legs and condensate return on medium-pressure lines.

Compressed air & pneumatics

Workshop ring mains, drops and tool points that must not leak.

Hydraulic lines

High-pressure hydraulic power packs and press circuits — socket-weld class.

HVAC & industrial utility

Chilled water, instrument air and general utility piping in plant rooms.

BRAND & SUPPLY

DRP Malleables Pvt. Ltd. — ISO 9001:2015

Certified forged-fitting manufacturer, stocked and supplied by Vijay Sales Corporation.

DRP MS forged fittings are manufactured by DRP Malleables Pvt. Ltd. in Jalandhar, an ISO 9001:2015 certified forgings maker, and drop-forged from steel for a dense grain-following body. Vijay Sales Corporation is an authorised DRP dealer and distributor, holding ready stock at our Delhi warehouse and supplying across India. Read about DRP on the specifications page →

Vijay Sales Corporation est. 1961 → Authorised DRP dealer & distributor → 7,000+ SKUs ex-stock → Industry Outlook Top 10 Distributor 2023 & 2024

RELATED RANGES

Related Ranges

Specifications and other ranges stocked at our Delhi warehouse.

TERMS OF SALE

Pricing & Terms

How rates, discount and dispatch work.

  1. Discount on LIST PRICE of DRP MS Forged Fittings: 55% (subject to requirement) — for your net landed rate, WhatsApp 9999889008 or email sales@vijaysalescorp.com.
  2. NPT & BSPT threading 20% extra; Hot Galvanised 25% extra; Bombay Polish 15% extra; DRP Steel Cap Socket 10% extra.
  3. Rates are per piece, Ex-Delhi Warehouse; cartage & freight extra at actual.
  4. GST @ 18% extra.
  5. Ruling price at the time of despatch shall be applicable.
  6. Prices subject to change without notice.

DRP MS forged fittings, 6mm to 100mm, in both 1000 LBS threaded and 3000 LBS socket-weld classes — ready stock at our Delhi warehouse, dispatched pan-India in 2–6 days. Same-day quotation on WhatsApp.

WhatsApp for Net Rates

QUESTIONS & ANSWERS

MS Forged Pipe Fittings — FAQ

Common questions on DRP forged fitting prices, classes and sizes.

What is the difference between 1000 LBS and 3000 LBS forged fittings?

1000 LBS fittings are threaded, with BSP threads to IS:1239 (Part-II), so they screw onto steel pipe and can be opened again with hand tools — used on serviceable water, air and instrument lines. 3000 LBS fittings are socket weld to IS:4712 / ANSI B16.11 — the pipe drops into a deep socket and is fillet-welded for a heavier-wall, permanent, leak-free joint on higher-pressure steam, hydraulic and process lines. The number is the manufacturer hydro-test pressure, not a hard working-pressure limit.

What is the price of a 1/2" MS forged elbow?

The DRP 1/2" (15mm) MS forged elbow in the 1000 LBS threaded class is Rs. 108 per piece at list price, GST 18% extra. The 3/4" elbow is Rs. 166 and the 1" is Rs. 254. A 55% discount applies subject to requirement.

What is the price of a 1" MS forged socket?

The DRP 1" (25mm) MS forged socket, 1000 LBS threaded, is Rs. 94 per piece at list price. The 1/2" socket is Rs. 51 and the 2" is Rs. 307. Socket-weld sockets in the 3000 LBS class are priced separately in the second matrix above.

What are the types of MS forged pipe fittings?

The 1000 LBS threaded range covers elbow, tee, union, socket, reducing elbow, reducing tee, reducing socket, male/female elbow, reducing bush, plug, hex nipple, reducing hex nipple, hydraulic nipple, reducing hydraulic nipple, cross, reducing cross and 45° elbow — 17 items. The 3000 LBS socket-weld range adds elbow, reducing elbow, tee, reducing tee, union, socket, reducing socket, cross, reducing cross and 45° elbow — 10 items. All 27 are in the matrices above.

What standard are MS forged threaded fittings made to?

DRP 1000 LBS threaded fittings are made to IS:1239 (Part-II) 2011 / BS EN-10241:2000, with BSP threads. The 3000 LBS socket-weld fittings are made to IS:4712-2011 / ANSI B16.11. Both are drop-forged from steel and dispatched with the manufacturer's test certificate.

Is Vijay Sales Corporation an authorised DRP dealer?

Yes. Vijay Sales Corporation is an authorised DRP dealer and distributor. You can view our DRP dealership certificate and buy genuine DRP forged fittings from ready stock at our Delhi warehouse.

Is discount available on DRP list prices?

Yes. A discount of 55% on the DRP list price is available, subject to requirement (quantity and mix). Message us on WhatsApp 9999889008 or email sales@vijaysalescorp.com for your net landed rate.

Are galvanised or NPT-threaded forged fittings available?

Yes, as extras on the list rate: NPT & BSPT threading is 20% extra, hot galvanising 25% extra, Bombay polish 15% extra, and a DRP steel cap socket 10% extra. Specify the finish and threading when you send your requirement.

Do you supply outside Delhi?

Yes. DRP forged fittings are held as ready stock at our Delhi warehouse and dispatched pan-India, typically in 2–6 days depending on location. Freight and cartage are extra at actual; share your delivery city and PIN for a landed quote.

What is the difference between forged and malleable GI fittings?

Forged steel fittings are drop-forged from solid billet for a dense, high-pressure body used on steam, hydraulic and process lines. Malleable GI fittings are cast and galvanised for corrosion-resistant water and gas lines at lower pressure. For the GI range see our UNIK GI fittings price list.

BUILD YOUR REQUIREMENT

Build Your DRP Requirement

Add each fitting, size and quantity to your list — we build one WhatsApp message for the whole requirement.

    No items yet — add fittings above to build your requirement.

    ABOUT THE AUTHOR

    Punya Gupta — COO, Vijay Sales Corporation

    Punya Gupta writes and maintains Vijay Sales Corporation's pipe-fittings price lists, working directly from supplier price lists and live warehouse stock. Vijay Sales Corporation has traded industrial pipes, tubes and fittings from Delhi since 1961, and was named an Industry Outlook Top 10 Iron & Steel Distributor 2023 and 2024.