Jindal (India) Limited Pipes
HFW GI & MS steel pipe from half-inch to 20 inch, square and rectangular hollow sections and API line pipe — made by Jindal (India) Limited at its Howrah, West Bengal works, and stocked and supplied across India by Vijay Sales Corporation.
Jindal (India) Limited, part of the B.C. Jindal Group, makes HFW GI and MS steel pipe from half-inch to 20 inch, hollow sections and API line pipe at its Howrah, West Bengal works, a lineage dating to 1952. Vijay Sales Corporation stocks and supplies the range, serving East India against the Howrah works.
Jindal (India) Limited manufactures under ISO 9001, ISO 14001:2004 and OHSAS 18001:2007 systems, UL:852 listing and the API monogram programme, and its products are BIS-licensed and marked. Vijay Sales Corporation stocks and supplies the range from its Delhi warehouse with pan-India dispatch, and supply is accompanied by the manufacturer's mill test certificates.
About Jindal (India) Limited
Jindal (India) Limited is part of the B.C. Jindal Group; the company's brochure credits the origin of the modern tubes-and-pipes business in India to the vision of Shri B.C. Jindal, dating back to 1952. Its Steel Pipe Manufacturing & Coating Division operates from works at Belur, Ghusury, Jangalpur and Ranihati, Howrah, West Bengal, and the brochure states a volume of over 6,00,000 tonnes per annum. The mill produces HFW/HFIW pipe, black and galvanised, from half-inch to 20-inch diameter in wall thicknesses of 1.2mm to 14.3mm, to a range of Indian and international standards.
Vijay Sales Corporation stocks and supplies Jindal (India) Limited pipe — holding material at its Delhi warehouse for North-India and pan-India orders, and quoting against the manufacturer's current schedule for project requirements. Because the mill is at Howrah, requirements from East India are commonly served against the Howrah works, giving eastern project sites factory-side dispatch, while Delhi ready stock serves North India and pan-India orders. Every supply is accompanied by the manufacturer's mill test certificates.
A word on the name, because it causes real confusion on site and in tender files: Jindal (India) Limited is a separate company from Jindal Pipes Limited (which makes the Jindal Star brand) and from Jindal Industries Pvt. Ltd. (which makes Jindal Hissar). They share the Jindal surname but not ownership, plants or BIS licences — the Jindal pipe brand guide sets out which name means which company.
The manufacturer's brochure lists project approvals and assessment from EIL, MECON, GAIL, GSPL, IOCL, BPCL and HPCL among others — these are Jindal (India) Limited's own approvals as a maker, not Vijay Sales Corporation's, and are noted here only to indicate the standard the mill is built to.
Product Range & Specifications
The Jindal (India) Limited envelope, from the manufacturer's brochure. Sizes are the maker's stated ranges; the weight and dimension charts follow below.
GI Pipe (Hot-Dip Galvanised)
Galvanised ERW round tube for water, plumbing and general service.
- Diameter: half-inch to 20 inch (brochure envelope)
- Wall: 1.2mm to 14.3mm
- Galvanising: minimum 0.490 kg/m², average 0.550 kg/m²
- To IS:1239 (Part-1) and other applicable standards
MS ERW Round Pipe
Black (self-coloured) mild-steel HFW round tube.
- Outside diameter: 21.3mm to 508mm
- Wall: 1.2mm to 14.3mm
- Length: 6.0m to 18.0m (SRL / DRL / TRL)
- Ends: plain, or threaded-and-coupled
- Coatings: oil / varnish / 3LPE / 3LPP / FBE
Hollow Sections (SHS / RHS)
Square and rectangular structural sections.
- SHS: 19×19mm to 150×150mm
- RHS: 40×20mm to 240×120mm
- Wall: 1.2mm to 8.0mm · length 6m to 18m
- To IS:4923 and ASTM A-500
- Finish: black, varnish/oil, or hot-dip galvanised
API 5L Line Pipe
Welded steel line pipe for oil, gas and water transmission, made from control-rolled HR coil.
- API 5L (PSL 1 & PSL 2) welded line pipe
- API 5CT casing and tubing
- Made under the API monogram programme
- External 3LPE / 3LPP / FBE and internal epoxy coating available
PPGI & Steel Sheet
A sheet product, not pipe — listed here for completeness. Jindal (India) Limited also makes galvanised and colour-coated (PPGI) steel, CRC sheet and aluminium foil laminates.
Supplied against inquiry; send the grade, coating and coil/sheet size for a quotation.
Standards Jindal (India) Limited Is Licensed To
The BIS Indian Standards reproduced from the approvals page of the manufacturer's brochure, with each standard's stated scope.
| Standard | Scope, as licensed |
|---|---|
| IS:1161:2014 | Structural tubes — 15MM to 350MM NB, wall to 12.7mm, grades YST 210 / 240 / 310. |
| IS:1239 (Part-1):2004 | MS and galvanised tubes — 15MM to 100MM NB in Light class, and 15MM to 150MM NB in Medium and Heavy class, plain as well as socketed ends. |
| IS/ISO 3183:2007 | Line pipe for petroleum & natural gas pipeline transportation — all sizes and grades, wall to 12.7mm. |
| IS:3589:2001 | Water and sewage — 168.3mm to 508.0mm OD, wall to 12.7mm, grade Fe 330 & 410. |
| IS:3601:2006 | Mechanical & general engineering — 21.3mm to 406.4mm OD, wall to 12.7mm, grades WT160 / 210 / 240 / 310. |
| IS:4270:2001 | Water wells — 100MM to 450MM NB, wall to 10.0mm, grade Fe 410. |
| IS:4923:1997 | Hollow sections (structural) — all sizes and grades, wall to 10.0mm, grades YST 210 / 240 / 310. |
| IS:9295:1983 | Idler / belt-conveyor tubes — up to and including 168.3mm OD, wall to 5.4mm, grades YST 210 & 240. |
Accreditations per the brochure: UL:852 listed (half-inch to 16 inch, to ASTM A135 / A795 / A53), ISO 9001, ISO 14001:2004 and OHSAS 18001:2007, and the API monogram programme for 5L and 5CT line pipe. Products are BIS-licensed and marked for the domestic market.
Weight & Dimension Charts
Transcribed from the manufacturer's brochure and validated against the standard mass formula. Round-pipe weights are nominal per weight (kg/m) = (OD − t) × t × 0.02466; hollow-section weights are nominal per the standard section formula. These are reference figures — no rates appear on this page.
a) IS:1239 (Part-1) — MS & GI round tube, nominal weight (kg/m)
| Size (NB) | Inch | Light / Class A (kg/m) | Medium / Class B (kg/m) | Heavy / Class C (kg/m) |
|---|---|---|---|---|
| 15MM | ½″ | 0.95 | 1.21 | 1.44 |
| 20MM | ¾″ | 1.38 | 1.56 | 1.87 |
| 25MM | 1″ | 1.98 | 2.41 | 2.93 |
| 32MM | 1¼″ | 2.54 | 3.10 | 3.79 |
| 40MM | 1½″ | 3.23 | 3.56 | 4.37 |
| 50MM | 2″ | 4.08 | 5.03 | 6.19 |
| 65MM | 2½″ | 5.74 | 6.42 | 7.93 |
| 80MM | 3″ | 6.72 | 8.36 | 9.90 |
| 100MM | 4″ | 9.75 | 12.20 | 14.50 |
| 125MM | 5″ | — | 15.90 | 17.90 |
| 150MM | 6″ | — | 18.90 | 21.30 |
Light (Class A) is shown only to 100MM, and Medium/Heavy to 150MM: this maker's IS:1239 (Part-1) BIS licence covers Light class to 100MM NB, and Medium & Heavy to 150MM NB, which is why Light is unavailable at 5″ and 6″. Light = Class A, Medium = Class B, Heavy = Class C — the class guide explains the difference; weights are standard-fixed and identical across compliant makers.
b) IS:3589:2001 — water & sewage pipe, nominal mass (kg/m)
| NB | OD (mm) | Wall (mm) | Mass (kg/m) | Metres / tonne |
|---|---|---|---|---|
| 150MM | 168.3 | 2.60 | 10.60 | 94 |
| 150MM | 168.3 | 3.20 | 13.00 | 77 |
| 150MM | 168.3 | 4.00 | 16.20 | 62 |
| 150MM | 168.3 | 4.50 | 18.20 | 55 |
| 150MM | 168.3 | 5.00 | 20.10 | 50 |
| 150MM | 168.3 | 6.30 | 25.20 | 40 |
| 175MM | 193.7 | 2.60 | 12.30 | 81 |
| 175MM | 193.7 | 3.60 | 16.90 | 59 |
| 175MM | 193.7 | 4.50 | 21.00 | 48 |
| 175MM | 193.7 | 6.30 | 29.10 | 34 |
| 200MM | 219.1 | 2.60 | 13.90 | 72 |
| 200MM | 219.1 | 3.60 | 19.10 | 52 |
| 200MM | 219.1 | 4.50 | 23.80 | 42 |
| 200MM | 219.1 | 6.30 | 33.10 | 30 |
| 250MM | 273.0 | 3.60 | 23.90 | 42 |
| 250MM | 273.0 | 4.00 | 26.50 | 38 |
| 250MM | 273.0 | 5.00 | 33.04 | 30 |
| 250MM | 273.0 | 6.30 | 41.40 | 24 |
| 250MM | 273.0 | 7.10 | 46.57 | 21 |
| 250MM | 273.0 | 8.00 | 52.30 | 19 |
| 250MM | 273.0 | 10.00 | 64.90 | 15 |
| 300MM | 323.9 | 4.00 | 31.60 | 32 |
| 300MM | 323.9 | 4.50 | 35.40 | 28 |
| 300MM | 323.9 | 5.60 | 44.00 | 23 |
| 300MM | 323.9 | 7.10 | 55.50 | 18 |
| 350MM | 355.6 | 5.60 | 48.33 | 21 |
| 350MM | 355.6 | 6.40 | 55.11 | 18 |
| 350MM | 355.6 | 7.10 | 61.02 | 16 |
| 350MM | 355.6 | 7.90 | 67.74 | 15 |
| 350MM | 355.6 | 8.70 | 74.42 | 13 |
| 350MM | 355.6 | 9.50 | 81.08 | 12 |
| 400MM | 406.4 | 5.60 | 55.35 | 18 |
| 400MM | 406.4 | 6.40 | 63.13 | 16 |
| 400MM | 406.4 | 10.00 | 97.76 | 10 |
| 400MM | 406.4 | 12.70 | 123.31 | 8 |
| 450MM | 457.0 | 5.60 | 62.34 | 16 |
| 450MM | 457.0 | 8.00 | 88.58 | 11 |
| 450MM | 457.0 | 10.00 | 110.24 | 9 |
| 450MM | 457.0 | 12.70 | 139.16 | 7 |
| 500MM | 508.0 | 5.60 | 69.38 | 14 |
| 500MM | 508.0 | 8.00 | 98.65 | 10 |
| 500MM | 508.0 | 10.00 | 122.81 | 8 |
| 500MM | 508.0 | 12.70 | 155.13 | 6 |
Weights are nominal per the standard formula. Two rows were corrected against the arithmetic check before publishing: the 300MM × 5.00mm row’s stated mass and metres-per-tonne both correspond to a 4.50mm wall, so the wall is shown as 4.50mm; and the 250MM × 5.00mm mass is shown as the formula nominal 33.04 kg/m.
c) IS:4270:2001 — water-well casing pipe, nominal weight (kg/m)
| NB | OD (mm) | Wall (mm) | Weight (kg/m) | Metres / tonne |
|---|---|---|---|---|
| 100MM | 114.3 | 5.0 | 13.48 | 74 |
| 100MM | 114.3 | 5.4 | 14.50 | 69 |
| 125MM | 141.3 | 5.0 | 16.80 | 59 |
| 125MM | 141.3 | 5.4 | 18.10 | 55 |
| 125MM | 141.3 | 7.1 | 23.50 | 42.5 |
| 150MM | 168.3 | 5.0 | 20.13 | 50 |
| 150MM | 168.3 | 5.4 | 21.60 | 46 |
| 150MM | 168.3 | 7.1 | 28.20 | 35.5 |
| 175MM | 193.7 | 5.4 | 25.10 | 40 |
| 175MM | 193.7 | 6.4 | 29.60 | 34 |
| 175MM | 193.7 | 8.0 | 36.60 | 27 |
| 200MM | 219.1 | 5.4 | 28.46 | 35 |
| 200MM | 219.1 | 6.4 | 33.60 | 30 |
| 200MM | 219.1 | 8.0 | 41.60 | 24 |
| 250MM | 273.1 | 7.1 | 46.57 | 21 |
| 250MM | 273.1 | 8.0 | 52.30 | 19 |
| 250MM | 273.1 | 10.0 | 64.90 | 15 |
| 300MM | 323.9 | 7.1 | 55.47 | 18 |
| 300MM | 323.9 | 8.0 | 62.30 | 16 |
| 300MM | 323.9 | 10.0 | 77.40 | 13 |
| 350MM | 355.6 | 5.6 | 48.33 | 21 |
| 350MM | 355.6 | 6.4 | 55.11 | 18 |
| 350MM | 355.6 | 7.1 | 61.02 | 16 |
| 350MM | 355.6 | 7.9 | 67.74 | 15 |
| 350MM | 355.6 | 8.7 | 74.42 | 13 |
| 350MM | 355.6 | 9.5 | 81.08 | 12 |
| 400MM | 406.4 | 5.6 | 55.35 | 18 |
| 400MM | 406.4 | 6.4 | 63.13 | 16 |
| 400MM | 406.4 | 10.0 | 97.76 | 10 |
| 450MM | 457.2 | 5.6 | 62.37 | 16 |
| 450MM | 457.2 | 6.4 | 71.15 | 14 |
| 450MM | 457.2 | 8.7 | 96.23 | 10 |
| 450MM | 457.2 | 10.0 | 110.29 | 9 |
Weights are nominal per the standard formula. One row was corrected: the brochure listed 150MM at 5.4mm twice, with masses 20.13 and 21.60; the 20.13 value (and its metres-per-tonne) match a 5.0mm wall, so that row is shown as 5.0mm, leaving a single genuine 5.4mm row at 21.60 kg/m.
d) ASTM A-795 — steel pipe for fire protection (black & galvanised)
| NB | Inch | OD (mm) | Sch 10 wall (mm) | Sch 10 (kg/m) | Sch 30/40 wall (mm) | Sch 30/40 (kg/m) |
|---|---|---|---|---|---|---|
| 15MM | ½″ | 21.3 | — | — | 2.77 | 1.27 |
| 20MM | ¾″ | 26.7 | 2.11 | 1.28 | 2.87 | 1.69 |
| 25MM | 1″ | 33.4 | 2.77 | 2.09 | 3.38 | 2.50 |
| 32MM | 1¼″ | 42.2 | 2.77 | 2.69 | 3.56 | 3.39 |
| 40MM | 1½″ | 48.3 | 2.77 | 3.11 | 3.68 | 4.05 |
| 50MM | 2″ | 60.3 | 2.77 | 3.93 | 3.91 | 5.45 |
| 65MM | 2½″ | 73.0 | 3.05 | 5.26 | 5.16 | 8.64 |
| 80MM | 3″ | 88.9 | 3.05 | 6.46 | 5.49 | 11.29 |
| 90MM | 3½″ | 101.6 | 3.05 | 7.41 | 5.74 | 13.58 |
| 100MM | 4″ | 114.3 | 3.05 | 8.37 | 6.02 | 16.09 |
| 125MM | 5″ | 141.3 | 3.40 | 11.58 | 6.55 | 21.79 |
| 150MM | 6″ | 168.3 | 3.40 | 13.85 | 7.11 | 28.29 |
| 200MM | 8″ | 219.1 | 4.75 | 25.26 | 7.04 | 36.82 |
ASTM A-795 (Schedule 10 and Schedule 30/40), transcribed from the manufacturer's brochure. Galvanising minimum 0.490 kg/m², average 0.550 kg/m². Tolerances (A-135/A-795): OD ±0.41mm up to 40MM NB and ±1% OD for 50MM NB and larger; thickness −12.5% max; weight ±5%.
e) Hollow sections (cold-formed) — nominal weight (kg/m)
A compact selection across the range, one representative wall per size; other walls and sizes are supplied per the brochure. Validated against the standard section-mass formula.
| Square (SHS) size (mm) | Wall (mm) | Weight (kg/m) |
|---|---|---|
| 19 × 19 | 2.00 | 0.99 |
| 20 × 20 | 2.00 | 1.05 |
| 25 × 25 | 2.00 | 1.39 |
| 30 × 30 | 2.41 | 1.97 |
| 32 × 32 | 3.60 | 2.95 |
| 38 × 38 | 4.00 | 3.95 |
| 40 × 40 | 2.00 | 2.31 |
| 51 × 51 | 3.18 | 4.52 |
| 60 × 60 | 4.00 | 6.71 |
| 64 × 64 | 4.78 | 8.32 |
| 72 × 72 | 4.00 | 8.22 |
| 75 × 75 | 4.00 | 8.59 |
| 76 × 76 | 4.78 | 10.21 |
| 80 × 80 | 4.00 | 9.22 |
| 91 × 91 | 4.00 | 10.60 |
| 102 × 102 | 4.78 | 13.85 |
| 127 × 127 | 6.35 | 22.94 |
| 152 × 152 | 4.78 | 21.44 |
| 178 × 178 | 4.78 | 25.07 |
| Rectangular (RHS) size (mm) | Wall (mm) | Weight (kg/m) |
|---|---|---|
| 40 × 20 | 2.00 | 1.68 |
| 50 × 25 | 3.20 | 3.24 |
| 60 × 40 | 3.20 | 4.50 |
| 80 × 40 | 3.20 | 5.50 |
| 96 × 48 | 4.00 | 8.22 |
| 102 × 51 | 3.96 | 8.60 |
| 122 × 61 | 4.00 | 10.67 |
| 127 × 76 | 4.78 | 13.85 |
| 145 × 82 | 4.00 | 13.43 |
| 150 × 50 | 4.00 | 11.73 |
| 152 × 102 | 6.35 | 22.94 |
| 152 × 102 | 4.00 | 15.12 |
| 160 × 80 | 4.00 | 14.25 |
| 172 × 92 | 4.00 | 15.75 |
| 203 × 102 | 4.78 | 21.44 |
| 203 × 152 | 4.78 | 25.07 |
| 240 × 120 | 4.00 | 21.78 |
| 254 × 102 | 4.78 | 25.09 |
Cold-formed hollow sections to IS:4923 / ASTM A-500; sizes other than those shown are supplied subject to negotiation. The full Jindal Hissar SHS & RHS weight-and-property tables are on the section-pipe page.
The HFW Line-Pipe Process
Jindal (India) Limited rolls its tube by high-frequency welding (HFW/HFIW) from control-tested hot-rolled coil. Per the brochure, raw material is acquired as 100% specially-tested HR coil from SAIL, Tata Steel, Nippon Steel & Sumitomo Metal and JFE. The line runs continuously through the following sequence.
- Coil preparation — HR/slit coil is uncoiled and roller-levelled flat.
- Coil joining & accumulation — a shear-end welder joins coil ends; a spiral accumulator lets the mill run without stopping.
- Edge milling & forming — strip-edge milling, then cage and fin-roll forming shape the strip into an open tube.
- Solid-state HF welding — the tube seam is welded by a solid-state high-frequency welder.
- Bead removal & seam annealing — internal and external weld bead is trimmed; the weld seam is annealed.
- Sizing for ovality — a rotary sizing mill brings the tube to size with minimum ovality.
- Cooling & cutting — air and water cooling, then a fly cut-off; cold-saw ends give bur-free finishing.
- End facing — ends are faced (and threaded-and-coupled or bevelled where specified).
- NDT — hydrostatic testing, plus weld and body ultrasonic testing.
- Inspection — works inspection and a customer inspection bench.
- Finishing — marking, rust-preventive coating or hot-dip galvanising, and coating (3LPE/3LPP/FBE/internal epoxy) where ordered.
- Weighing, bundling & dispatch — weighing and measuring, automatic bundling, then shipping.
Buying Jindal (India) Limited Pipe
There is no published Jindal (India) Limited price list — steel moves with the market and the schedule changes. So ordering is a short, direct exchange rather than a table lookup:
- Send the requirement — WhatsApp or email the sizes, class or schedule, coating (black / GI / 3LPE etc.), quantity and delivery location.
- Get a quotation — a formal quotation follows, priced against the current Jindal (India) Limited schedule for those items.
- Routing — East-India requirements are commonly served against the Howrah works for factory-side dispatch; North-India and pan-India orders draw on Delhi ready stock or are dispatched from the nearest point.
- On dispatch — supply is accompanied by the manufacturer's mill test certificates, with the invoice and delivery challan for the order.
Jindal (India) Limited Pipe — FAQ
Is Jindal (India) Limited the same as Jindal Star or Jindal Hissar?
No — they are separate companies that share the Jindal surname. Jindal (India) Limited is part of the B.C. Jindal Group and manufactures at Howrah, West Bengal; Jindal Star is made by Jindal Pipes Limited, and Jindal Hissar by Jindal Industries Pvt. Ltd. They do not share ownership, plants or BIS licences — see the brand guide.
Who makes Jindal India pipes?
Jindal (India) Limited, part of the B.C. Jindal Group, with Steel Pipe Manufacturing & Coating works at Belur, Ghusury, Jangalpur and Ranihati, Howrah, West Bengal. The brochure states a volume over 6,00,000 tonnes per annum and a lineage in tubes and pipes dating to Shri B.C. Jindal since 1952.
Does Vijay Sales Corporation hold a price list for Jindal India pipes?
There is no published Jindal (India) Limited price list. We quote on inquiry against the current Jindal (India) schedule for your sizes, class and quantity — WhatsApp or email the requirement and a formal quotation follows.
Can you supply Jindal India pipes in East India?
Yes. Requirements from East India are commonly served against Jindal (India) Limited's Howrah works, giving eastern project sites factory-side dispatch, while ready stock at our Delhi warehouse serves North India and pan-India orders.
Is Jindal India GI (galvanised) pipe available?
Yes. Jindal (India) Limited makes black and galvanised pipe; the brochure states an envelope of black and galvanised round tube to 20 inch. Confirm the exact galvanised size on inquiry — supply comes with the manufacturer's mill test certificates.
What hollow section sizes does Jindal India make?
Per the brochure, SHS runs 19×19mm to 150×150mm and RHS 40×20mm to 240×120mm, in walls 1.2mm to 8.0mm and lengths 6 to 18 metres, to IS:4923 and ASTM A-500.
Do Jindal India pipes come with test certificates?
Yes — supply is accompanied by the manufacturer's mill test certificates for the material dispatched, with the invoice and delivery challan.
How does Jindal India pipe compare for fire-fighting lines?
Jindal (India) Limited lists ASTM A-795 (steel pipe for fire protection) among its standards and carries the A-795 dimension-and-weight table (above). The class and schedule for any fire line are set by the fire consultant and the code, so build to the specification named.
Send Your Jindal (India) Limited Requirement
List the sizes, class or schedule, coating and quantity — a formal quotation follows, priced against the current schedule.
Vijay Sales Corporation — stockist and supplier of Jindal (India) Limited pipe, holding stock at its Delhi warehouse for pan-India supply and serving East India against the Howrah works. This is a reference guide; it carries no prices — requirements are quoted on inquiry.
Registered offices: 803 International Trade Tower, Nehru Place, New Delhi-110019 · 3356 Hauz Qazi, Delhi-110006.
GSTIN: 07AAGPG5324D1Z6 · Udyam (MSME) Reg: UDYAM-DL-01-0005438.
Methodology: manufacturer data from the Jindal (India) Limited brochure; weights validated per the IS standard mass formula. "Jindal" and the Jindal (India) trademark are the property of their respective owners; Vijay Sales Corporation is an independent stockist and supplier.