Jindal Pipe Weight Chart
Nominal weight for GI and MS pipe to IS:1239, in Light, Medium and Heavy classes. The standard sets the weight, so this chart reads the same whether the pipe is branded Jindal Star or Jindal Hissar.
A Jindal pipe weight chart lists nominal weight per running metre to IS:1239. Because the standard fixes the weight, Jindal Star and Jindal Hissar pipe of the same size and class weigh the same: 15MM Medium is 1.21 kg/m, 50MM Medium is 5.03 kg/m, and 150MM Heavy is 21.30 kg/m, within a minus-10% tolerance.
These figures are the IS:1239 nominal weights, cross-checked against stock held at the Delhi warehouse of Vijay Sales Corporation, a certified dealer of both brands supplying pan-India.
The Weight Is Set by the Standard, Not the Maker
Every figure in a Jindal pipe weight chart comes from IS:1239, the Indian Standard for GI and MS tubes. The standard fixes the outside diameter and the wall thickness for each size and class, and weight follows directly from those two dimensions. That is why the nominal weight of, say, a 50MM Medium pipe is the same whether it is rolled by Jindal Pipes Limited as Jindal Star or by Jindal Industries Pvt. Ltd. as Jindal Hissar — the maker cannot change a figure the standard has set.
Two points matter when reading the chart. First, the weight shown is the plain-end nominal weight, and a tolerance of up to minus 10 percent is permitted, so an actual length can weigh slightly less than the table. Second, GI and MS carry the same nominal figure: the zinc coating on galvanised pipe is thin enough that it is not counted in the nominal weight, so one chart serves both the black and the galvanised product.
The chart below gives the weight per running metre — the basis on which pipe is sold — and an approximate weight for a standard 6 metre length beside it, for working out load and freight.
Jindal GI & MS Pipe Weight Chart — IS:1239
Nominal weight per metre by class, with an approximate per-6m figure, 15MM to 150MM. Same for Jindal Star and Jindal Hissar.
| Size & class | Wall (mm) | Weight (kg/m) | Approx. weight per 6m length (nominal per-metre × 6) |
|---|---|---|---|
| 15MM · Light (A) | 2.0 | 0.95 | 5.7 |
| 15MM · Medium (B) | 2.6 | 1.21 | 7.3 |
| 15MM · Heavy (C) | 3.2 | 1.44 | 8.6 |
| 20MM · Light (A) | 2.3 | 1.38 | 8.3 |
| 20MM · Medium (B) | 2.6 | 1.56 | 9.4 |
| 20MM · Heavy (C) | 3.2 | 1.87 | 11.2 |
| 25MM · Light (A) | 2.6 | 1.98 | 11.9 |
| 25MM · Medium (B) | 3.2 | 2.41 | 14.5 |
| 25MM · Heavy (C) | 4.0 | 2.93 | 17.6 |
| 32MM · Light (A) | 2.6 | 2.54 | 15.2 |
| 32MM · Medium (B) | 3.2 | 3.10 | 18.6 |
| 32MM · Heavy (C) | 4.0 | 3.79 | 22.7 |
| 40MM · Light (A) | 2.9 | 3.23 | 19.4 |
| 40MM · Medium (B) | 3.2 | 3.56 | 21.4 |
| 40MM · Heavy (C) | 4.0 | 4.37 | 26.2 |
| 50MM · Light (A) | 2.9 | 4.08 | 24.5 |
| 50MM · Medium (B) | 3.6 | 5.03 | 30.2 |
| 50MM · Heavy (C) | 4.5 | 6.19 | 37.1 |
| 65MM · Light (A) | 3.2 | 5.74 | 34.4 |
| 65MM · Medium (B) | 3.6 | 6.42 | 38.5 |
| 65MM · Heavy (C) | 4.5 | 7.93 | 47.6 |
| 80MM · Light (A) | 3.2 | 6.72 | 40.3 |
| 80MM · Medium (B) | 4.0 | 8.36 | 50.2 |
| 80MM · Heavy (C) | 4.8 | 9.90 | 59.4 |
| 100MM · Light (A) | 3.6 | 9.75 | 58.5 |
| 100MM · Medium (B) | 4.5 | 12.20 | 73.2 |
| 100MM · Heavy (C) | 5.4 | 14.50 | 87.0 |
| 125MM · Light (A) | 4.8 | 15.90 | 95.4 |
| 125MM · Heavy (C) | 5.4 | 17.90 | 107.4 |
| 150MM · Medium (B) | 4.8 | 18.90 | 113.4 |
| 150MM · Heavy (C) | 5.4 | 21.30 | 127.8 |
Nominal weight is fixed by IS:1239; the permitted minus-10% tolerance applies, and mill lengths vary. Treat the per-6m column as an estimating figure for load and freight, not as a billing weight — pipe is billed on measured running metres. 125MM has no Medium class and 150MM has no Light class in the standard.
The IS:1239 chart runs 15MM to 150MM. Larger diameters follow IS:3589 and are supplied to order — up to 400MM in black and 300MM in GI for Jindal Hissar, and up to 600MM for Jindal Star. WhatsApp the size for its weight →
Need the full technical chart with outside diameters, SWG and metres-per-tonne, or the class-by-class wall thicknesses? See the Jindal Hissar weight & thickness charts and the class A, B, C guide.
How to Read Weight Into a Per-Metre or Per-Kg Basis
Pipe is sold and billed by the running metre, not by weight — but the two are tied together by the nominal weight in the chart, which is why a “per kg” figure and a “per metre” figure describe the same pipe. Knowing the weight lets you move between the two.
To turn a per-kg figure into a per-metre figure, multiply the per-kg rate by the nominal weight per metre. To go the other way, divide a per-metre figure by that same weight to read it back as a per-kg figure. The weight is the bridge; the arithmetic is one multiplication.
On the full technical chart, the “metres per tonne” column does the same job at scale: it is simply how many metres make up one tonne of that size and class. This page carries no rates; for current rates see the price lists, and for an exact figure by length and quantity use the calculators below.
Weight Calculators & Related Charts
Pipe weight calculator
Exact weight for round pipe by size, class, length and quantity. Open calculator →
Section weight calculator
Exact weight for square and rectangular hollow sections. Open calculator →
SHS & RHS weight charts
Hollow-section weight follows IS:4923, not IS:1239. Section weight charts →
Full technical charts
Outside diameters, SWG, tolerances and the TDS. Jindal Hissar technical data →
Jindal Pipe Weight — FAQ
What is the weight of Jindal pipe per metre?
Weight per metre is set by IS:1239 for each size and class — for example, 15MM Medium is 1.21 kg/m, 50MM Medium is 5.03 kg/m and 150MM Heavy is 21.30 kg/m. The chart above lists Light, Medium and Heavy for every size from 15MM to 150MM.
Is Jindal Star and Jindal Hissar pipe weight different?
No. Nominal weight per metre is defined by IS:1239, not the maker, so a given size and class weighs the same for both. The minus-10% tolerance applies equally.
How do I calculate Jindal pipe weight per kg?
Pipe is billed per metre, and each size and class has a fixed weight per metre. To convert a per-kg quote to per-metre, multiply the per-kg rate by that weight; to reverse it, divide the per-metre figure by the weight. The per-metre and per-kg section shows a worked example.
What is the weight of a 6 metre Jindal pipe?
Multiply the weight per metre by six. A 50MM Medium pipe at 5.03 kg/m is about 30.2 kg for 6 metres. The per-6m column gives this for every size; it is an estimating figure, since mill lengths vary and the minus-10% tolerance applies.
What weight is 15MM Jindal GI pipe?
To IS:1239, 15MM pipe weighs 0.95 kg/m in Light, 1.21 kg/m in Medium and 1.44 kg/m in Heavy. GI and MS carry the same nominal figure; the zinc coating is not counted in the nominal weight.
What is the MS pipe weight chart for Jindal pipe?
MS (black) pipe follows the same IS:1239 nominal weights as GI, because the standard sets them by size and class, not by coating. This chart therefore serves both MS and GI from 15MM to 150MM.
Does the chart cover sizes above 150MM?
IS:1239 runs 15MM to 150MM. Larger diameters follow IS:3589 and are supplied to order — up to 400MM in black and 300MM in GI for Jindal Hissar, and up to 600MM for Jindal Star. Send the size for its weight.
Where can I get the weight of a square or rectangular section?
Hollow-section weight follows IS:4923, not IS:1239, and is listed with per-metre and per-6m figures on the Jindal section-pipe page.
Need the Weight of a Specific Size?
List the sizes and classes you want the weight for — or a large size beyond the chart — and send it across.
Vijay Sales Corporation — certified dealer of Jindal Star and Jindal Hissar, stocking at its Delhi warehouse for pan-India supply. This is a reference chart; it carries no prices — see the Jindal Hissar and Jindal Star price lists.
Registered offices: 803 International Trade Tower, Nehru Place, New Delhi-110019 · 3356 Hauz Qazi, Delhi-110006.
GSTIN: 07AAGPG5324D1Z6 · Udyam (MSME) Reg: UDYAM-DL-01-0005438.
Methodology: nominal weights per IS:1239 (Part-1):2004; per-6m figures are the per-metre weight × 6, shown as estimates. Weights are standard-fixed and identical across compliant makers.